Powered 12 in. 2-Way Integrated Stage Monitor Loudspeaker System

Powered 12 in. 2-Way Integrated Stage Monitor Loudspeaker System

The VP7212MDP is a powered 12" 2-way integrated loudspeaker system designed specifically as a high-impact stage monitor.


·       Powered bi-amplified full-range loudspeaker with JBL DrivePack® technology for stage monitor use.

·       High-impact system with premium fidelity.

·       Field rotatable baffle for easy left/right configurations.

·       1750 watts peak output power, 875 watts continuous.

·       12-inch Differential Drive® low-frequency driver for extended lowfrequency output.

·       50° x 90° coverage optimized for use as stage monitor.

·       Robust powder-coated die cast aluminum handles, designed for strength and comfort.


Frequency Response

80 Hz - 18 kHz ( ± 3 dB)

Frequency Range

55 Hz - 20 kHz (-10 dB)

Coverage Pattern

50° x 90°

Directivity Factor (Q)


Directivity Index (DI)

11 dB

Maximum Peak Output

134 dB SPL 1m

Transducer Section


Low Frequency Section

JBL 2262G, 304mm (12in) dia., 76mm (3in) Dual Coil neodymium Differential Drive®, Direct Cooled

Bandpass Nominal Impedance

2 x 2 ohms

High Frequency

JBL2452H-SL, 100 mm (4 in) titanium damped diaphragm, 1.5 in. exit.

Bandpass Nominal Impedance

8 ohms



DP2 Internal Amplification Output (at nominal load)

1750 Watts Peak, 
875 Watts Continuous

DP2 Output (Continuous IEC shaped pink noise into rated load impedance)

1-Channel, Class I

DPC-2 Output Section

LF: Dual Bridged Technology™, Class D HF: Bridged Class D

Audio Input connector

XLR with loop-through

User Controls

System EQ Selection: Full Range or Speech/Vocal 0-16 dB input Attenuator with 32 precision 0.5 dB steps

Signal Processing

DSP Based, resident in Input Module

System Management

DSP based limiters for mechanical and thermal protection

AC Power Operating Range

90-132 VAC/216-264 VAC, 50/60 Hz

AC Line Voltage

50/60 Hz; User Selectable; 120V/240V (-15%, +10%)

AC Input Connector

Neutrik PowerCon (NAC 3MPA)

AC Loop-thru

Neutrik PowerCon (NAC 3MPB)

AC Current Requirement

6A per system at 120V, 3A per system at 240V


5/8in multi-ply exterior grade Baltic birch. Internally braced. Black DuraFlex™ finish.


14 Gauge Black powder-coated perforated steel with foam backing

Dimensions (H x W x D)

346 x 565 x 413 mm (13.6 x 22.3 x 16.2 in)

Net Weight

20.7 kg (45.5 lbs)