The easiest-to-use digital console workflow on the market, now available in an even smaller package.


The easiest-to-use digital console workflow on the market, now available in an even smaller package.

The Soundcraft Vi2000 reinvents the small format digital console with an ultra-compact implementation of the same control surface layout and workflow as its larger Vi siblings. Featuring 96 inputs to mix, 24 mono/stereo busses and the same SpiderCore built-in DSP and I/O engine as the Vi3000, the console can also be used with remote I/O via the double option card slots and an optional Stagebox.

The latest addition to Soundcraft's Vi range of digital live consoles, the new Vi2000 brings unparalleled mixing power to the live touring, install and corporate AV markets in a single-box, cost-effective package. The new console combines the unique Vistonics-based control surface concepts of the highly successful Vi3000, 5000 and 7000 consoles, with Soundcraft® SpiderCore - a powerful integrated DSP and IO engine based on STUDER technology and compact enough to reside inside the control surface itself.

Running the latest V6.1 console software, the Vi2000 benefits from the acclaimed BSS DPR901ii Dynamic EQ via an insertable processing pool which also includes Lexicon Multi-effects and the ability to insert any external device.

In addition to a full complement of on-board mic and line IO, configurable up to 48 mic line inputs and 16 line outputs using combinations of 16ch XLR modules in 4 rear-mounted slots, the console includes two 64ch expansion slots allowing up to two MADI-based Stageboxes to be connected, or alternatively the slots provide access to the extensive range of D21m IO option cards, addressing all industry standard audio formats. The total I/O count of the console is 246 in 246 out.

In common with other Vi000-series consoles, a built-in 64x64ch Dante interface provides direct recording/playback connection via Ethernet to any PC or Mac-based recording software, or allows the Vi2000 to integrate into an existing Dante network.

The Dante interface is complimented by an additional optical MADI interface designed for either record feeds or connection of the Soundcraft Realtime Rack Plug-in engine, adding the power of Universal Audio UAD-powered plug-ins to the Vi2000's pristine audio quality.

The package is completed by an ultra-compact frame design only 1.15m in width, with 16 input faders and 8 output faders, allowing the console to fit into both space and budget restricted applications. Patented features like Faderglow, VM2 microphone monitoring and Vistonics provide a uniquely user-friendly mixing experience and superb sound quality is assured by a 40-bit floating-point DSP environment, running STUDER, BSS, Lexicon and dbx algorithms.


Control Surface

Input Faders


Output Faders

8 +3 (LRC masters) +1 (Monitor A/B)

Total Faders


3D Vistonics screens

3 (2 input, 1 master)

Fader bay operation

4x Fixed Input layers A/B/C/D giving 64 inputs on 16 fdrs.

Input channels can be assigned to Master bay for 24 input fdrs.

5x User layers 1-5

1x Busses 1-16 Layer plus screen assign 17-24, for 24 mono/stereo busses

VCA/A/B/C/D/E output/input fader pages, (A-E user definable)

Local I/O Physical


Mic/Line Inputs

48, 32 or 16 configurable (max 3x 16ch out cards of 4 total) (Last 5 outs default to local

monitors but can be repatched)


2 (=4ch) plus optional 16ch via Vista1 card (remove 2 mic or line out cards to fit).


2 (=4ch) plus optional 16ch via Vista1 card (remove 2 mic or line out cards to fit).

TB Mic in

1 front panel, with rear-switched 48V.

Phones out

1 ste jack, under armrest

Optical MADI In/Out

1 (outputs paralleled with Dante interface)

Dante ports

1x 64ch in/out (2x Ethercon Pri/Sec). 

Dante inputs are A/B switched with optical MADI.

D21m Option Slots

2 double/4single (total 128ch)

AES/EBU Input Sample Rate

32–108kHz (with SRC enabled)

Total number of simultaneous IO channels

246 inputs / 214 outputs (assumes 48 mic in/16 line out config)

DSP Mixing Core


Soundcraft® SpiderCore


40-bit Floating point, 48kHz sample rate

Input Channels to mix

96 mono Pairable to 48 stereo

Busses - Aux/Grp

24 mono/stereo

Busses – Matrix

From 24 bus pool – max 16 mono/stereo.

Busses – Master

3 (LRC)

Assignable Insert Points

64 + 4FX

Tie Lines

128 (allow Stagebox IO to connect to Local IO without using mixing channels.

Lexicon FX

4 units (14 reverbs, 7 delays, 8 pitch-shift effects in each unit) Tap Delay from F-key 1-4.


24 mono/stereo +LRC

External Control



1 (dedicated HiQnet / Realtime Rack control)


1 In, 1 Out

Other Ports

Mains Input

2, switched (redundant power supplies built in)


4 (2 front, 2 rear)


In /Out 2x BNC

DVI out

Reserved for future use

Gooseneck lamp 4-pin XLR

2, for rear panel illumination


Optional, via MADI optical or Cat 5 option cards fitted to D21m expansion slots. Can connect up to 2 x 64ch Vi Stageboxes. Also

compatible with Compact Stagebox and Mini Stagebox


Frequency Response

Stagebox Mic input to Line output

+0/-1dB, 20Hz-20kHz


+0/-0.2dB, 20Hz-20kHz


Stagebox Mic In (min gain) to Local Line Out

<0.003% @ 1kHz

Stagebox Mic In (max gain) to Local Line Out

<0.020% @ 1kHz

Local Line In to Line Out

<0.003% @ 1kHz

Mic Input E.I.N.

<-126dBu (150Ω source)

22Hz-22kHz bandwidth, unweighted 

Residual Noise


Stagebox line output; no inputs routed, Mix fader @0dB 



80dB @ 1kHz

Sampling Frequency




Stagebox Mic Input to Local Line output

< 2ms @48kHz

AES/EBU Input Sample Rate


32–108kHz (with SRC enabled)

DSP Resolution


40-bit floating point

Internal Clock 


< +/- 50ppm


< +/- 2ns

External Sync


BNC Wordclock

Input & Output Levels 

Mic Inputs

+28dBu max

Line Inputs

+22dBu max

Line Outputs

+22dBu max

Nominal Operating Level

+4dBu (-18dBFS)

Input & Output Impedances

Mic Inputs


All other analogue Inputs


Line Outputs


AES/EBU Outputs




20Hz to 20kHz/Pink/White Noise, variable level

Stagebox HP Filter

80Hz fixed, 12dB per octave

Channel HP Filter

20Hz-600Hz, 18dB per octave

Channel LP Filter

1kHz-20kHz, 18dB per octave

EQ (Inputs and Bus Outputs)


20Hz-20kHz, +/-18dB, Q= 0.3-8.7 or shelving


20Hz-20kHz, +/-18dB, Q=0.3-8.7


20Hz-20kHz, +/-18dB, Q=0.3-8.7


20Hz-20kHz, +/-18dB, Q= 0.3-8.7 or shelving


Internal 20-segment LED bargraphs plus 9-segment gain reduction meters for all inputs and Outputs. Peak hold variable

from 0-2s.

Mains Voltage Operating Range


90-264V, 47-63Hz, auto-ranging

Mains Power Consumption



Temperature/Humidity Range 

Operating Temperature Range

0°C – 45°C (32°F – 113°F)

Relative Humidity

0% – 90%, non-condensing Ta=40°C (104°F)

Storage Temperature Range

-20°C – 60°C (-4°F – 140°F)

Net Weight


45.2kg (99.6lbs)

Unit Dimensions (HxWxD)


351mm (13.8") x 1155mm (45.5") x 803mm (31.6")

Sản phẩm cùng loại