MARTINRUSH FiberSource 1

RUSH FiberSource 1


A highly anticipated update to the FiberSource QFX 150, the new RUSH FiberSource 1 is a powerful tool for illuminating fiber optic cables in permanent installations. With a new 78 W LED fiber projector, the RUSH FiberSource 1 boasts improved efficiency and reliability while retaining all the key features of its predecessor, such as nine interchangeable colors, a twinkle effects wheel, electronic dimming and DMX/stand-alone control.


·       78 W LED fiber projector

·       9 interchangeable colors

·       0-100% electronic intensity control

·       Twinkle effect wheel

·       DMX or stand-alone control

·       Up to 300 fiber cables (1 mm)



Length: 305 mm (12.0 in.)

Width: 210 mm (8.3 in.)

Height: 200 mm (7.9 in.)

Weight: 7.6 kg (16.8 lbs.)

Dynamic Effects

Color wheel: 9 interchangeable filters + open, indexing, continuous rotation

Twinkle effect: Continuous rotation, variable speed and direction

Dimmer: 0 - 100% continuous dimming

Control and Programming

Control options: DMX, standalone, master/slave

DMX channels: 5

Standalone programming: DIP switch

Settings and DMX addressing: DIP switch

DMX compliance: USITT DMX512/1990


Light source: CREE 78 W LED

Color temperature: 6000–7000 K

CRI (color rendering index): >70

Minimum LED lifetime: 35 000 hours (to >70% luminous output)*

*Figure obtained under test conditions:


Color: Black (RAL 9005)

Housing: Steel and aluminum

Protection rating: IP20


Mounting points: Four rubber-mounting grommets, two Ø13 mm holes for rigging clamps

Location: Indoor use only, must be fastened to surface or structure

Minimum distance to combustible materials: 0.2 m (7.9 in.)

Minimum clearance around fans and vents: 0.1 m (4.0 in.)

Orientation: Any


AC power in/out: Neutrik PowerCon

DMX data in/out: 3-pin and 5-pin locking XLR


AC power: 100-240 V, 50/60 Hz

Power supply unit: Auto-ranging electronic switch-mode

Typical Power and Current

110 V, 60 Hz: 0.8 A, 87 W, PF 0.986

230 V, 50 Hz: 0.5 A, 86 W, PF 0.909

Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:


Cooling: Forced air (regulated, low noise)

Maximum ambient temperature (Ta max.): 40° C (104° F)

Minimum ambient temperature (Ta min.): 5° C (41° F)

Maximum surface temperature, steady state, at 40° C ambient: 50º C (122° F)


EU Safety: EN 60598-2-1

EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61547

US Safety: ANSI/UL 1598

US EMC: 47 CFR Part 15 Class A

Canadian Safety: CSA C22.2 No. 250.0

Australia/NZ: C-TICK N4241

Included Items

Power cable, 1.5 m (4.9 ft.), without mains plug:

Color filter M05, blue 108L w. adaptor:

Color filter M05, yellow 603L w. adaptor:

Color filter M05, green 206L w. adaptor:

Color filter M05, red 308L w. adaptor:


Color filter M05, green 202L w. adaptor: P/N 62327931

Color filter M05, blue 111L w. adaptor: P/N 62327928

Color filter M05, blue 101L w. adaptor: P/N 62327929

Color filter M05, cyan 401L w. adaptor: P/N 62327930

Color filter M05, yellow 604L w. adaptor: P/N 62327932

Color filter M05, red 301L w. adaptor: P/N 62327933

Color filter M05, pink 312L w. adaptor: P/N 62327934

Color filter M05, magenta 507L w. adaptor: P/N 62327935

Color filter M05, purple 502L w. adaptor: P/N 62327936

Color filter M05, green 204L w. adaptor: P/N 62327937

Color filter M05, orange 306L w. adaptor: P/N 62327938


Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508

Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509

Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510

Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511

Power Connectors

Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804

Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805

Installation hardware

Half-coupler clamp: P/N 91602005

G-clamp (vertical suspension only): P/N 91602003

Quick-trigger clamp (vertical suspension only): P/N 91602007

Safety cable, safe working load 50 kg: P/N 91604003

Ordering Information

RUSH FiberSource 1™ in cardboard box: P/N 90280070


Sản phẩm cùng loại