YOUR FAVORITE LEXICON® REVERBS AND EFFECTS, NOW AVAILABLE IN PARALLEL STEREO AND SURROUND
Building on the success of the PCM96, the new PCM96 Surround offers more presets, more configuration options, and more inputs and outputs. The PCM96 Surround gives you industry standard reverbs and effects, with tremendous flexibility. Use the PCM96 Surround as a plug-in with your DAW, or keep it connected to your mixer. Either way, you have a multitude of configuration options to choose from, without having to move any cables.
The PCM96 Surround is available with either 6 channels of XLR/AES inputs and outputs, or 2 DB25 6-channel analog I/O and 1 DB25 6-channel digital I/O. Both versions also feature MIDI, Wordclock, Ethernet, and FireWire®.
· Available in two models:
* 6 channels of XLR/AES inputs and outputs
* 2 DB25 6-channel analog I/O and 1 DB25 6-channel digital I/O
· New Parallel Stereo and Surround configurations
· 50 legendary Lexicon reverbs, delays, and modulation effects
· Lexicon’s new Surround Room algorithm, used to generate a vast array of room-related effects for music and post
· New Pitch algorithms 9 Seamless automation and control via Ethernet or FireWire
· Over 2200 factory presets, including recognizable classics from Lexicon's immense library of sounds
· Hardware Plug-In capability inside Mac® VST®, Audio Units, or RTAS software
· 32-bit floating point processing
· Sample rates up to 96kHz
· External BNC Wordclock
· MIDI in, out, and thru
· 1024 user presets
· Compact Flash for additional storage
ANALOG INPUTS
Connectors
Impedance
Level (for 0 dbFS)
Freq Response @96K
A/D Conversion
A/D Dyn Range
THD
Crosstalk @ 1Khz
|
One 25-pin Dsub female connector
20K Ohm, balanced
+4dBu mode: +20dBu
–10dBV mode: 8.2dBu
20Hz - 22kHz, ±.15dB
20Hz - 46kHz ±.5dB
24 bits
112dB unweighted, 115dB A-weighted
<0.002% 20 → 20kHz @ +4dBu
<–75dB at 20 → 20k with a +20dBuinput signal
|
ANALOG OUTPUT
Connectors
Impedance
Level (at 0 dBFS)
Freq Response @96K
D/A Conversion
D/A Dyn Range
THD
Crosstalk @ 1kHz
|
One 25-pin Dsub female connector
30 Ohm, electronically balanced
+4dBu mode: +20dBu
–10dBV mode: 8.2dBu
20Hz - 22kHz, ±.15dB
20Hz - 46kHz ±.5dB
24 bits
112dB unweighted, 115dB A-weighted
<0.002% 20Hz - 20kHz at +4dBu
<–75dB at 20Hz - 20kHz with a +20dBu input signal
|
DIGITAL AUDIO IO
Connectors
Format
Word Size
|
One 25-pin Dsub female connector
AES/EBU
24 bits
|
SAMPLE RATES
Internal
Accuracy
External
Lock Range
|
44.1kHz/48kHz/88.2kHz/96kHz
within ±50ppm
44.1kHz/48kHz/88.2kHz/96kHz
±2% of nominal
|
SYNCHRONIZATION
TTL Word Clock Input
|
75 Ohm, BNC, externally terminated to allow cascade
|
CLOCK JITTER
Intrinsic
Jitter Gain
|
Exceeds AES3 Amendment 1
Exceeds AES3 Amendment 1
|
CONTROL INTERFACES
MIDI
|
In/Out/Thru
|
ALGORITHMS
Chamber
Random Delay
Random Hall
Plate
Dual Delay
Resonant Chords
Chorus/Flange
Concert Hall
Room
Hall
|
Surround, Stereo and Mono
Surround, Stereo and Mono
Surround, Stereo and Mono
Surround, Stereo and Mono
Surround, Stereo and Mono
Surround, Stereo and Mono
Surround, Stereo and Mono
Surround, Stereo and Mono
Surround, Stereo and Mono
Surround, Stereo and Mono
|
Storage Media
|
Type I Compact Flash
Can hold up to 2048 user presets
|
MACHINE CONFIGURATIONS 44.1K → 96K
|
Single Stereo (Mono In)
Single Stereo
Dual Stereo (Mono In)
Dual Stereo
Cascade Stereo
Dual Mono
Quad Mono
Cascade Mono
Dual Mono + Single Stereo
Cascade Mono to Stereo
Single Two In Four Out
Single Four In Four Out
Single Two In Five Out
Single Five In Five Out
Single Six In Six Out
|
INTERNAL HARD DISK STORAGE
|
Internal non-volatile Flash. Can hold 1024 user presets.
|
POWER
Requirements
Connector
|
100-120 / 220-240 VAC
50-60Hz, 20W max
3-pin IEC
|
DIMENSIONS/WEIGHT
Rack Units
Size
Weight
|
1U
19.0” W x 1.75” H x 16” D
(483mm x 44.5mm x 317.5mm)
14.25 lbs
|