The RUSH PAR 1 RGBW is a bright LED PAR Can with premixed RGBW color mixing. It offers electronic dimming and strobe and comes with a flexible bracket for floor or truss mounting.


·       Bright LED PAR Can

·       Premixed RGBW color mixing

·       17° one-tenth peak angle

·       Electronic dimming and strobe

·       Flexible bracket – floor or truss-mounted

·       5-pin XLR



Length: 260 mm (10.3 in.)

Width: 195 mm (7.7 in.)

Height: 293 mm (11.6 in.)

Weight: 3.6 kg (8.0 lbs.)

Dynamic Effects

Color mixing: RGBW

Color selection: 33 color presets plus full white, 'color wheel' effects

Electronic dimming: 0 - 100%

Strobe and pulse effects: Variable speed and action, random strobe

Electronic 'shutter' effect: Instant open and blackout

Zoom: Motorized

Control and Programming

Control options: DMX, stand-alone scene

DMX channels: 5/9

White balance control: RGB adjustment

DMX address setting: Control panel with LCD display

Stand-alone programming: Control panel with LCD display

Protocol: USITT DMX512/1990


Light source: 7 x 10 W RGBW Cree MC-E LEDs

Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer's test conditions:


Housing: Aluminum

Color(s): Black

Protection rating: IP20


Mounting: Adjustable bracket, surface or truss mount

Orientation: Any

Location: Indoor use only


AC power in/thru: Neutrik PowerCon

DMX data in/thru: 5-pin XLR


AC power: 100-240 V nominal, 50/60 Hz

Typical total power consumption: 151 W

Power consumption figures are typical, not maximum. Allow for +/-10% variation.:

Typical Power and Current

110 V, 60 Hz: 1.1 A, 78 W

230 V, 50 Hz: 0.7 A, 78 W

Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:


Cooling: Forced air (temperature-regulated, low noise)

Maximum ambient temperature (Ta max.): 40° C (104° F)

Minimum ambient temperature (Ta min.): 0° C (32° F)

Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 270 BTU/hr.


EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493

EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547

US safety (pending): UL 1573

US EMC: 47 CFR Part 15 Class A

Canadian safety (pending): CSA C22.2 No. 166

Canadian EMC: ICES-003 Class A

Australia/NZ: C-TICK N4241

Included Items

Power cable 1.5 m

Mounting bracket


Gel Frame for RUSH PAR 2, set of 10: P/N 46000106

Cables, 16 A, for connection to power in chains:

Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector,3 m (9.8 ft.): P/N 11541508

Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors,1.4 m (4.6 ft.): P/N 11541509

Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors,2.25 m (7.4 ft.): P/N 11541510

Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors,3.25 m (10.7 ft.): P/N 11541511

Power Connectors

Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804

Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805

Related Items

RUSH™ Software Uploader 1: P/N 91611399

Ordering Information

RUSH PAR 1 RGBW™ in cardboard box: P/N 90480000