MARTINMAC 101

MAC 101

 

The MAC 101 is a remarkably small, super light and easy-to-use LED moving head wash light with an amazingly bright beam for such a compact luminaire. It features rapid movement and calibrated colors with a low price tag that allows for revolutionary set, stage and decorative lighting desin.

Features

·       Agile RBG LED Wash-Beam light

·       Color calibrated

·       2400 lm output

·       Bright and tight beam (13° field angle)

·       Smooth, electronic dimming

·       Ultra-compact, low weight design (3.7 kg)

·       Rapid movement – the fastest MAC ever

·       High efficiency, low power consumption, long lifetime

Specifications

Physical

Length: 241 mm (9.5 in.) across yoke

Width: 241 mm (9.5 in.) across yoke

Height: 304 mm (12.0 in.)

Weight: 3.7 kg (8.2 lbs.)

Dynamic Effects

Electronic 'color wheel' effect: 33 LEE-referenced colors plus white, color wheel rotation effect, random color

Color mixing: RGB

Red: 0 - 100%

Green: 0 - 100%

Blue: 0 - 100%

Color temperature control: Variable 2500 - 10 000 K

Shutter effect: Electronic, with pulse and random effects

Electronic dimming: 0 - 100%, four dimming curve options

Pan: 540°

Tilt: 240°

Pan and tilt speed: Adjustable via onboard control panel and DMX

Control and Programming

Control options: 3 control modes - RGB raw, RGB calibrated, Basic (RGB + CTC disabled)

RDM: Implemented

Control resolution: 8-bit, with 16-bit control of pan & tilt

DMX channels: 8/12

Setting and addressing: Control panel with backlit graphic display

Protocol: USITT DMX512-A, ANSI/ESTA E1.20 RDM

Transceiver: RS-485

Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box

Optics

Light source: Cree XP-E high power emitters

LED refresh rate: 1220 Hz

Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer's test conditions:

Construction

Color: Black or white

Housing: High-impact flame-retardant thermoplastic

Protection rating: IP20

Installation

Mounting points: One M12 threaded hole for rigging clamp

Location: Indoor use only, must be fastened to surface or structure

Orientation: Any

Minimum distance to combustible materials: 100 mm (4.0 in.) from head, no minimum distance from base

Minimum distance to illuminated surfaces: 200 mm (7.9 in.)

Connections

AC power input: Neutrik PowerCon

AC power throughput: Neutrik PowerCon

DMX data in/out: 5-pin locking XLR

Electrical

AC power: 100-240 V nominal, 50/60 Hz

Maximum total power consumption: 123 W

Power supply unit: Auto-ranging electronic switch mode

Main fuse: 5 AT (slow blow)

Typical power consumption, all effects static, zero light output: <25 W

Typical Power and Current

100 V, 50 Hz: 122 W, 1.3 A, PF 0.991

120 V, 60 Hz: 121 W, 1.1 A, PF 0.987

208 V, 60 Hz: 123 W, 0.7 A, PF 0.938

230 V, 50 Hz: 123 W, 0.6 A, PF 0.915

240 V, 50 Hz: 123 W, 0.6 A, PF 0.900

PF = power factor: Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:

Thermal

Cooling: Forced air (temperature-regulated, low noise, user-definable levels)

Maximum ambient temperature (Ta max.): 40° C (104° F)

Minimum ambient temperature (Ta min.): 5° C (41° F)

Total heat dissipation (calculated, +/- 10%): 420 BTU/hr.

Approvals

EU safety: EN 60598-2-17, EN 62471

EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547

US safety: UL 1573

US EMC: FCC Part 15 Class A

Canadian safety: CSA E598-2-17

Canadian EMC: ICES-003 Class A

Australia/NZ: C-TICK N4241

Included Items

M12 bolt suitable for use with Martin rigging clamps:

User manual: P/N 35000246

Accessories

3 m power cable, 12 AWG, SJT, with PowerCon NAC3FCA power input connector: P/N 11541503

Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804

Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805

Set of eight narrow diffusers for MAC 101™: P/N 91616023

Set of eight wide diffusers for MAC 101™: P/N 91616018

Set of 4 top hats for MAC 101™: P/N 91611358

Set of 5 quick-mount surface mounting brackets for MAC 101™: P/N 91606017

G-clamp: P/N 91602003

Quick trigger clamp: P/N 91602007

Safety cable, safe working load 50 kg: P/N 91604003

8-unit flightcase for MAC 101™: P/N 91515010

Half-coupler (tube) clamp: P/N 91602005

Related Items

Martin USB Duo™ DMX Interface Box: P/N 90703010

Martin RDM 5.5 Splitter™: P/N 90758150

Ordering Information

MAC 101™ in cardboard box: P/N 90231600

MAC 101™ in 8-unit flightcase: P/N 90231610

MAC 101™, white finish, in cardboard box: P/N 90231630