Dual 15" Two-Way Sound Reinforcement Loudspeaker System

Dual 15" Two-Way Sound Reinforcement Loudspeaker System

The JRX225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback.


·       Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.

·       JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.

·       The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.

·       A "Quasi 3-Way" design offers the extra bass for which a dual fifteen system is designed, but without sacrificing performance in the critical mid-range. The upper woofer produces mid-frequencies and bass, while the lower woofer concentrates on bass only. The reduction in mid-range phase cancellation greatly improves midrange sound quality and coverage.

·       High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.

·       Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.

·       The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.

·       SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance.

·       Non-resonant, all-steel handles are used.

·       Attractive 18-gauge perforated, steel grille protects components from damage.


Power Rating

500 W / 2000 W

Frequency Range (-10 dB)

42 Hz - 18 kHz

Frequency Response (±3 dB)

62 Hz - 13 kHz

Sensitivity (@1m)

100 dB SPL (1w/1m)

Nominal Impedance

4 ohms

Recommended Amplifier Power

500 W to 1000 W into 4 ohms

Maximum SPL

133 dB

Nominal Dispersion

90º x 50º

Crossover Frequency

2.2 kHz

Dimensions (H x W x D)

1092 mm x 464 mm x 426 mm (43 in x 18.3 in x 16.8 in)


42.6 kg (94 lb)

High Frequency Driver

JBL 2414H-C , 1" exit compression driver mounted on Progressive Transition™ Waveguide

Low Frequency Driver

JBL M115-8A x 2

Input Connectors

Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel 

Sản phẩm cùng loại