MARTINJEM Roadie Compact

JEM Roadie Compact

 

Martin's industry-standard Jem Roadie X-Stream is now available in a high-output, compact version.

Features

·       Onboard DMX, 3 & 5 pin

·       Pre-programmed stand-alone macros

·       On-board control panel

·       Optional multifunctional remote control

·       For vertical or horizontal effect projection

·       Output and density level control

·       Continuous output

·       2500 mÑ/min fog output

·       Integrated high velocity fan

·       2 x 1500 W heat exchanger

·       9 min heat-up time

·       9.5 liter fluid capacity

·       Different fluid options for different applications

·       Low fluid sensing

Specifications

Physical

Length: 800 mm (31.5 in.)

Width: 500 mm (19.7 in.)

Height: 600 mm (23.7 in.)

Dry weight: 80.0 kg (176.4 lbs.)

Performance

Max. fog output (approx.): 2500 m3 per minute

Max. operating time at full output (approx.): 90 minutes

Operating time: Continuous, automatic level adjustment

Warm-up time (approx.): 9 minutes

Control and Programming

Control options: Onboard control panel, DMX

Compatible remote controls: For limited control

DMX channels: 2 (output and fan)

Protocol: USITT DMX512/1990

Construction

Housing: Steel & aluminum

Heat exchanger: 2 x 1500 W, direct thermal protection

Fluid System

Fluid pump: Oscillating piston, high pressure X2

Onboard fluid capacity: 9.5 l

Fluid consumption at peak output: 220 ml per minute

Installation

Orientation: Floor mount (Horizontal or vertical) or flying kit

Connections

Remote control: 3-pin locking XLR

DMX data: 3-pin and 5-pin XLR sockets

Power cable entry: Hard-wired

Electrical

AC power: 208 V 60 Hz / 220 - 240 V 50 Hz

Main fuse (208-240 V power): Onboard 16 A Breaker

Typical Power and Current

208 V, 60 Hz: 2450 W, 12.7 A

220 V, 50 Hz: 2745 W, 12.5 A

230 V, 50 Hz: 3000 W, 13.04 A

240 V, 50 Hz: 3267 W, 13.6 A

Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:

Thermal

Maximum ambient temperature (Ta max.): 40° C

Exterior surface temperature, steady state: 50° C

Max. nozzle temperature: 200° C

Approvals

EU safety: EN 50 081-1, EN 50 082-1

EU safety: EN 60 335-1 (1995)

Included Items

User manual: P/N 35010027

Container 9.5 l: P/N 34300528

Hard wired mains cable 2 m: Pre-Installed

Flying kit: Pre-Installed

Accessories

Pro Smoke Studio (DX Mix) fluid

Pro Smoke Super (ZR Mix) fluid

Pro Smoke High Density (SP Mix) fluid

Pro Steam Simulation (AA) fluid

Pro Haze (Haze mix) fluid

Regular DJ (DJ mix) fluid

I-fog fluid

Roadie Compact remote control unit: P/N 92765031

Ducting Kit: P/N 92625010

Ordering Information

Jem Roadie Compact: P/N 92230500