MARTINExterior Wash 110

Exterior Wash 110

 

Exterior™ Wash 110 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate smaller structures, features of a building and landscaping. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 110 is designed for superior color mixing applications and is based on quad-color premixed LEDs.

Features

·       Powerful Premixed LEDs

·       Up to 1300 lumens at full white (RGBW)

·       Six different beam angle options

·       Internal power and control (DMX, RDM and OLED display)

·       Rugged IP66 housing

·       0–100% intensity control

Specifications

Physical

Length: 240 mm (9.5 in.)

Width: 198 mm (7.8 in.)

Height: 257 mm (10.2 in.)

Weight: 5.0 kg (11.1 lbs.)

Dynamic Effects

Intensity: 0 - 100%

Color mixing: RGBW

Control and Programming

Control systems: DMX, RDM

DMX channels: 4

Setting, addressing, standalone programming: Control panel with OLED display

Receiver: RS-485

Firmware update: Serial upload via DMX link

DMX compliance: USITT DMX512-A

RDM compliance: ANSI/ESTA E1.20

Optics

Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

Light source: RGBW quad-color LED

Beam angle options: 10°, 14°, 22°, 41°, 61°, 14° x 61°

*Figure obtained under manufacturer's test conditions:

Photometric Data

Total luminous output: 1300 lumens

Construction

Protection rating: IP66

Color: Clear anodized (standard), black or white (optional)

Housing: Cast aluminum

Effective Projected Area (EPA): 0.05 mÇ including snoot

Impact resistance: IK08

RoHS compliant

Installation

Orientation: Any

Mounting: Adjustable yoke

Vertical aiming: TBA

Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)

Connections

Power connection: 1.8 m (5.9 ft.) cable tail without connector

Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail

All cable entries: IP68 cable gland

Electrical

AC power: 100 - 240 / 277 V nominal, 50/60 Hz

Power supply unit: Integrated, auto-sensing multi-voltage

Power consumption, steady state, all LEDs at zero intensity: TBA

Typical Power and Current

120 V, 60 Hz: 0.4 A, 45 W, PF 0.99

230 V, 50 Hz: 0.2 A, 45 W, PF 0.89

Measurements made at nominal voltage. Allow for a deviation of +/- 10%

Thermal

Cooling: Convection

Maximum ambient temperature (Ta max.): 45° C (113° F)

Minimum ambient temperature (Ta min.): -30° C (-22° F), power must be maintained below 0° C (32° F)

Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F)

Total heat dissipation (calculated, +/- 10%): 160 BTU/hr

Approvals

EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1

EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5

US safety: ANSI/UL 1598

US EMC: 47 CFR Part 15 Class A

Canadian safety: CSA C.22.2 No. 250

Australia/NZ (pending): RCM

Included Items

Power cable: Cable tail, 1.8 m (5.9 ft.), external diameter 9.5 mm (0.38 in.), installed

Data cable: Cable tail, 1.8 m (5.9 ft.), external diameter 6.5 mm (0.26 in.), installed

Cover plate for control panel

Accessories

 

Optical

Exterior Wash 100 Series, narrow diffuser kit: P/N 91610145

Exterior Wash 100 Series, medium diffuser kit: P/N 91610146

Exterior Wash 100 Series, wide diffuser kit: P/N 91610147

Exterior Wash 100 Series, very wide diffuser kit: P/N 91610148

Exterior Wash 100 Series, asymmetric diffuser kit: P/N 91610149

Exterior Wash 100 Series, glare shield / snoot: P/N 91611740

Related Items

Martin USB interface box incl. cables: P/N 90758090

M-PC 2U™ incl. Martin M-DMX Interface Box and USB cable: P/N 90737070

Ordering Information

Exterior Wash 110, 10°, EU, aluminum: P/N 90510330

Exterior Wash 110, 10°, US, aluminum: P/N 90510345

Sản phẩm cùng loại