MARTINExterior Projection 1000

Exterior Projection 1000


The Exterior™ Projection 1000 is an unparalleled, powerful tool for permanent outdoor installations to integrate textures, patterns and graphics for limitless creative exterior lighting designs.

Sporting high impact and low maintenance, this advanced, IP66-rated LED projector offers sharp image quality, dynamic features and great reach over huge distances.

·       Flat-field, high-contrast image projection with wide zoom range

·       Fully weatherized with low maintenance and running

·       Full CMY color mixing for maximum creativity

Built to last 

It operates at temperatures from -30°C to 45°C and its robust, vandalism-proof IK08 and IP66-rated aluminum housing is surface treated to comply with the ISO12944/C5-M corrosion protection standard


·       Flat field, high contrast image projection based on high power LED engine

·       0-100% electronic dimming

·       Full CMY color mixing + additional color wheel with 7 interchangeable colors

·       7 gobo slots for projecting graphic images (gobos included)

·       Animation system for creating animated lighting effects (horizontal and vertical)

·       Zoom range from 10° - 43° for exact projection on desired surface

·       Variable frost for creating morphing effects and hybrid function as wash light

·       2 rotating prisms for creating abstract multi patterns

·       Intuitive setup, configuration and stand-alone programming via graphical OLED display

·       RDM and DMX control

·       Fully weatherized IP66 fixture for permanent outdoor installation

·       Fully convection cooling using heat pipes technology



Length: 702 mm (27.7 in.)

Width: 417 mm (16.5 in.)

Height: 618 mm (24.4 in.)

Weight: 50 kg (110 lbs.)

All figures include mounting yoke

Dynamic Effects

Color mixing: CMY, independently variable 0 - 100%

Color wheel: 7 interchangeable colors + open

Gobo wheel: 7 rotating gobos plus open, indexing, variable rotation

Gobo animation wheel: Indexing, continuous rotation with variable angle, speed and direction

Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing

Frost (wash effect): Motorized, variableZoom: 10° - 43° (cut-off angles)

Focus: Motorized, variable 3 m (9.8 ft.) to infinity

Shutter: Electronic, strobe and pulse effects, instant open and blackout

Dimming: Electronic, constantly variable 0-100%, 16-bit control

Control and Programming

Control options: DMX, RDM, standalone

DMX channels: 13

Configuration, addressing and status: Onboard control panel with OLED display

Control resolution: 8-bit DMX control of each color

DMX compliance: USITT DMX512-A

RDM compliance: ANSI/ESTA E1.20


Light source: 440 W white light LED engine

LED manufacturer: Appotronics

CRI (Color Rendering Index): 72

Color temperature: 6500 K (±250 K)

LED lifetime: 20 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer's test conditions

Photometric Data

Cut-off angle: 10° - 43°

Luminous intensity

At 10° zoom: 11 500 lumens

At 16° zoom: 15000 lumens

At 40° zoom: 16 800 lumens


Housing: Cast aluminum

Finish: Hard anodized, metallic grey lacquered

Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass

Ingress protection: IP66

Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)

Impact resistance: IK08 (with control panel display cover plate installed)

EPA (Effective Projected Area): 0.15 m2RoHS compliant


Suitable material: Metal or borosilicate glass, coatings heat-resistant to 450°C (842° F)

Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)

Maximum image diameter: 26 mm (1.02 in.)

Gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)

Gobo thickness, maximum: 3.0 mm ±0.3 mm (0.118 in. ± 0.012 in.)*

*Gobos thicker than 2.5 mm require a shorter spring in the goboholder


Orientation: Any (sides must be kept vertical)

Mounting: Adjustable yoke

Minimum distance to illuminated surfaces: 0.5 m (20 in.)

Location: Suitable for wet locations. Do not immerse in water.


Power cable entry: IP68 cable gland

Power connection: 1.8 m (5.9 ft.) cable tail with bare ends

Data cable entry: IP68 cable gland

Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends


AC power: 100-240/277 V nominal, 50/60 Hz

Power supply: Auto-ranging electronic switch-mode

Typical half-cycle RMS inrush current: 8.4 A

Surge protection: 4 KV

Idle power (zero intensity, no effects applied): 32 W, 0.3 A

Typical Power and Current

110 V, 60 Hz: 320 W, 2.9 A, PF 0.977

230 V, 50 Hz: 310 W, 1.4 A, PF 0.971

277 V, 60 Hz: 305 W, 1.2 A, PF 0.950

Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.


Cooling: Convection, internal forced air

Maximum ambient temperature (Ta max.): 45° C (113° F) *

Minimum ambient temperature (Ta min.): -30° C (-22° F)**

*Above this temperature, the fixture regulates output to protect from overheating.*

*For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F)


EU Safety: EN 60598-2-5, EN 60598-2-1, (EN 60598-1), EN 62471, EN 62493

EU EMC: EN 55015, EN 55032 (EN 55103-1), EN 55103-2, EN 61547, EN 61000-3-2, EN 61000-3-3

US safety (pending): ANSI/UL 1598US EMC: 47 CFR Part 15 Class B

Canadian safety (pending): CSA C22.2 No. 250.0

Australia/NZ (pending): RCM

Included Items

Silica gel desiccant bag: P/N 37220000

Two gobo retaining springs


Glare Shield, Exterior Projection 1000: P/N 91611768

Projection Setup Gobo, Exterior Projection 1000: P/N 9161607

Related Items

Martin™ RDM 5.5 Splitter: P/N 90758150

Spare Parts

Silica gel desiccant bag in sealed foil pack: P/N 37220000

Goboholder for EP1000 with magnet incl. washer & short spring:P/N 50482185

Goboholder for EP1000 with magnet incl. washer & long spring:P/N 50482186

Ordering Information

EU models

Exterior Projection 1000, EU, Aluminum: P/N 90512000

Exterior Projection 1000, EU, White: P/N 90512015

US models

Exterior Projection 1000, US, Aluminum: P/N 90512005

Exterior Projection 1000, US, White: P/N 90512010

Sản phẩm cùng loại