MARTINExterior Dot-HP

Exterior Dot-HP


Martin by HARMAN Exterior Dot-HP is a bright, outdoor-rated dot designed to create media facades or perimeter lighting on large buildings and structures for long-distance viewing. This high-performance exterior LED dot for large venues allows for long fixture runs with variable pixel pitches for flexible designs. A creative tool for lighting designers, the Exterior Dot-HP is available in two versions – RGB color mixing or cool white – with a number of front designs for a variety of unique looks. It is driven by the Martin P3 System Controller family for easy setup and video display. The Exterior Dot-HP is also compatible with RDM/DMX for smaller setups.

How processing works for LED video

·       High-intensity calibrated video dot

·       Rugged IP66 housing for permanent outdoor installations

·       Easy setup and long cable runs for clean installation


·       100 lumen per dot calibrated

·       Available in clear front, diffuser dome and directional lens variants

·       RGB or cold white LED engine

·       Flexible mounting system allows for customized solutions

·       Local integral in-built diagnostics tool

·       High-quality 16-bit per color image processing technology

·       Pixel-level brightness and color calibration for optimal image quality

·       P3/RDM/DMX controllable (automatic protocol detection)

·       Intuitive mapping and addressing via P3 System Controller

·       Combined power/data input over single cable

·       Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system



Diameter: 72 mm (2.9 in.)

Height with clear front: 34 mm (1.4 in.)

Height with dome front: 49 mm (2 in.)

Height with directional front: 43 mm (1.7 in.)

Weight, clear front and dome front models: 300 g (0.7 lbs.)

Weight, directional front models: 350 g (0.8 lbs.)

Control and Programming

Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500, Martin P3™ PowerPort 1000 IP and/or RDM/DMX

Protocol detection: Automatic

Control modes: RGB (RGB variants), white intensity (CW variants), basic

DMX channels: 3/10

Setting and addressing: Martin P3™ System controller or RDM-compliant DMX controller

Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color

Calibration: Color and intensity for each Dot

DMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20

Firmware update: Via Martin P3™ System Controller

Control/User Interface

Device status: Multi-color visual indication

Device test and reset: Magnetic button to call up fixture status and test fixture


Clear FrontDome front

Directional front (TIR lens)

LED manufacturer, Exterior Dot-HP RGB: Osram

LED manufacturer, Exterior Dot-HP CW: Seoul

Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer’s test conditions

Photometric Data

Color resolution: 16 bits per color (48 bit per pixel)

Dot pitch: 72 mm - 500 mm (center-to-center)

Viewing angle

Clear front: 103° x 103° (half-peak)

Dome front: 125° x 125° (half-peak)

Directional front: 22° x 22° (half-peak)

RGB Dots

Total output, calibrated mode

Clear front: 90 lumens, 36 cd

Dome front: 62 lumens, 18 cd

Directional front: 72 lumens, 270 cd

Total output, non-calibrated mode

Clear front: 120 lumens, 48 cd

Dome front: 80 lumens, 24 cd

Directional front: 96 lumens, 360 cd

Cool White Dots

Total output, calibrated mode

Clear front: 160 lumens, 62 cd

Dome front: 110 lumens, 32 cd

Directional front: 120 lumens, 590 cd

Total output, non-calibrated mode

Clear front: 210 lumens, 82 cd

Dome front: 142 lumens, 41 cd

Directional front: 160 lumens, 775 cd

Video Processing

Brightness control

Gamma correction and control

Color temperature control

Color space control

Calibration processing


Signal Protocol

P3 (via Martin P3™ PowerPort) or RDM/DMX


Base: Cast aluminum

Color: Electrostatic powder-coated (custom colors available by special order) (custom colors available on project basis)

Protection rating: IP66

Impact resistance: IK05

Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)

RoHS compliant


Orientation: Any

Mounting points: Direct surface mount, optional mounting plate or optional mounting profile


Power and data input: 6-pin custom (BBD) IP66-rated

Power and data thru: 6-pin custom (BBD) IP66-ratedHot-pluggable


Nominal input voltage: 48 VDC +/- 4%

Power supply options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Martin™ IP66 PSU or generic 48 VDC PSU

Typical total power consumption, calibrated mode: 5 W at full intensity, full white

Typical total power consumption, uncalibrated mode: 7 W at full intensity, full white

Surge protection: 4 KV


Cooling: Convection

Maximum ambient temperature (Ta max.): 55° C (131° F)

Minimum ambient temperature (Ta min.): -20° C (-4° F)

Total heat dissipation (calculated, +/- 10%): 20 BTU/hr.


EU safety: EN 60950-1, EN 60950-22

EU EMC: EN 55024, EN 55032 (Class A), EN 61000-3-2, EN 61000-3-3

US safety: UL 60950-1, UL 60950-22

US EMC: FCC Part 15 Class A

Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22

Canadian EMC: ICES-003 Class A

Australia/NZ: RCM


Magnetic Test Tool, set of 10: P/N 91610139

Mounting hardware

Flange Plate for Surface Mounting, aluminum, Exterior Dot-HP:P/N 91606020

Mounting Profile Kit incl. dot bracket, screws and lock, Exterior Dot-HP, 57 mm (2.25 in.) : P/N 91606021

Mounting Profile, Exterior Dot-HP / Pixline, 320 mm (12.6 in.): P/N 91611620

Mounting Profile, Exterior Dot-HP / Pixline, 1280 mm (50.4 in.):P/N 91611610

Dot Mounting Bracket for Exterior Dot-HP Mounting Profile: P/N TBA

Mounting Profile Locks, Exterior Dot-HP / Pixline, set of 10: P/N 91611725


Power + Data Input Cable, 4-pin male XLR (for P3 PowerPort 1500) to fem. BBD, 0.25 m (0.9 ft.): P/N 91616046

Power + Data Input Cable, 5-pin male XLR + wire tails (for PSU) to female BBD, 0.25 m (0.9 ft.): P/N 91616048

Power + Data Input Cable, 5-pin male XLR + male Martin™ IP66 PSU to fem. BBD, 0.25 m (0.9 ft.): P/N 91616050

Power + Data Extension Cable, Installation type CMX, BBD-BBD 1 m (3.3 ft.): P/N 91616055

Power + Data Extension Cable, Installation type CMX, BBD-BBD, 2.5 m (8.2 ft.): P/N 91616056

Power + Data Extension Cable, Installation type CMX, BBD-BBD, 5 m (16.4 ft.): P/N 91616057

Power + Data Extension Cable, Installation type CMX, BBD-BBD, 10 m (32.9 ft.): P/N 91616058

Power + Data Extension Cable, Installation type CMX, BBD-BBD, 25 m (82.1 ft.): P/N 91616059

Power + Data Extension Cable, Installation type CMX, without connectors, 100 m (328.1 ft.): P/N 91616060

DMX Leadout Adapter, male BBD to 5-pin female XLR, 0.25 m (0.9 ft.): P/N 91616051

Power+Data Adapter XLR5+XLR4-BBD 0.25 m (0.9 ft.): P/N 91616049

Power+Data Adapter BBD-XLR4 0.25 m (0.9 ft.): P/N 91616047


Power + Data Cable Connector, BBD, male: P/N 91611750

Power + Data Cable Connector, BBD, female: P/N 91611751

Blanking caps for unused female BBD connectors, set of 10: P/N 91616052

Related Items

Martin P3™ PowerPort 1500: P/N 90721040

Martin P3™ PowerPort 1000 IP Installation: P/N 90721080

Martin™ IP66 PSU 240 W external power supply unit: P/N 90760330

Martin P3-050™ System Controller: P/N 90721090

Martin P3-150™ System Controller: P/N 90721015

Martin P3-300™ System Controller: P/N 90721060

Martin P3-PC™ System Controller: P/N 90721030

Ordering Information

Exterior Dot-HP RGB, Aluminum, Clear Front: P/N 90357683

Exterior Dot-HP RGB, Aluminum, Dome Front: P/N 90357685

Exterior Dot-HP RGB, Aluminum, Directional Front (TIR lens): P/N 90357686

Exterior Dot-HP CW, Aluminum, Clear Front: P/N 90357688

Exterior Dot-HP CW, Aluminum, Dome Front: P/N 90357687

Exterior Dot-HP CW, Aluminum, Directional Front (TIR lens): P/N 90357689

*Dots in the Exterior Dot-HP range are supplied in cardboard boxes containing multiples of 9 dots. Remaining dots (and orders that consist of less than 9 dots total) are supplied in individual packs.

Sản phẩm cùng loại