SOUNDCRAFTEPM 12

Low-cost high-performance mixers




Low-cost high-performance mixers

The emphasis with the Soundcraft EPM is very firmly on quality build and audio performance, with an easy to understand control surface uncluttered by unnecessary facilities, and Soundcraft have brought new technologies and ideas to this very cost-effective range. 

The emphasis with the Soundcraft EPM is very firmly on quality build and audio performance, with an easy to understand control surface uncluttered by unnecessary facilities, and Soundcraft have brought new technologies and ideas to this very cost-effective range. Surface mount technology is used throughout, using close-tolerance components for high accuracy and repeatable settings for EQ and gain controls. The highly-transparent GB30 Mic amp (designed by Graham Blyth for the company’s 30th anniversary, and also used on the larger LX7ii and GB Series consoles) features high-resolution adjustment over a wide gain range of 55dB, and provides a stunning +22dB headroom through the console. True professional 48-volt phantom power caters for condenser microphones of all types. 

A unique feature of the signal monitoring is the PEAK led. This uses multipoint signal take-offs to watch for overload in several parts of the channel strip, and the led lights more brightly as the signal approaches the peak point. For smooth and accurate channel control, the EPM has 60mm high quality faders as used on other Soundcraft desks. The monitor output and headphone output work in parallel so that performers can still listen on phones while an engineer is listening on studio monitors.

Features

·       Frame sizes 12+2

·       2 configurable auxiliary buses

·       XLR-type and ¼” metal jack connector sockets

·       RCA phono stereo playback inputs and record outputs

·       3-band EQ with a swept mid on mono inputs

·       2-band EQ on stereo inputs

·       TRS insert sockets and inserts on all mono inputs and mix output

·       Ten-segment LED output metering

·       Intuitive and comprehensive solo system

·       Headphone output

·       Easily rack mountable

Specifications

Frequency Response

Mic/Line input to any output

20Hz to 20kHz +/-0.5dB

THD & Noise

 

<0.007% -30dBu Input routed to Mix, Mic gain 30dB

Mic Input EIN

22Hz-22kHz unweighted

-128dBu (150Ω source)

Bus Noise

Mix at Max, Faders down

<-85dBu

Crosstalk typically @1kHz

Channel Mute

>96dB

Fader cut-off (rel +10 mark)

>96dB

Aux Send pot offness

>86dB

Input & Output

Microphone Input

2.4kΩ

Impedances

Line Input

11kΩ

Stereo Input

100kΩ

Outputs

75Ω

Input & Output

Mic/Line input Maximum Level

+17dBu

Levels

Line input Maximum Level

+30dBu

Stereo Input Maximum Level

+30dBu

Mix Output Maximum level

+20dBu

Headphones (at 200Ω )

300mW

EQ (Mono Input)

HF

12kHz, ±15dB, shelving

Mid

150Hz - 3.5kHz, ±15dB, Q=1.5

LF

60Hz, ±15dB, shelving

Metering

 

12-segment LED bargraphs for Mix L&R outputs

Operating conditions

Temperature Range

- 10ºC to +30ºC

Relative Humidity

0% to 80%

Power Supply

 

Integral lightweight switched-mode PSU

AC mains supply

 

85V-270V AC, 50/60Hz universal input

Power consumption

 

Less than 20W

Dimensions

 

432mm(17”)W, 90.5mm(3.56”)H, 362mm(14.25”)D

Weight

 

6.7kgs(14.77lbs) 

Sản phẩm cùng loại