Physical
|
Length: 447 mm (17.6 in.)
Width: 500 mm (19.7 in.)
Height: 195 mm (7.7 in.)
Weight: 9.3 kg (20.5 lbs.) including bracket
|
Dynamic Effects
|
Motorized rotating parabolic mirror dish
Motorized mirror drum: 180° pan (swivel) and 360° tilt (continuous rotation)
Color / animation wheel: 7 colors plus 2 x open, twinkle animation effect
Gobo wheel: 13 gobos + open, wheel scrolling and continuous rotation, shake effect
Shutter: 0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout
Pre-programmed effects: Full range of macro effects
|
Control and Programming
|
Control options: DMX, stand-alone, master/slave
DMX channels: 10
Stand-alone trigger options: Music trig, auto trig
Music trig also settable via DMX
Setting and addressing: Control panel with backlit LCD display
Protocol: USITT DMX512/1990
Firmware update: Serial upload via DMX link
|
Lamp
|
Type: 130 W short-arc discharge with reflector
Color temperature: 8800 K
Average lifetime: 6000 hours*
*Manufacturer's figure:
|
Optics
|
Manual focus: 2 m - 20 m (6 ft. 7 in. - 65 ft. 8 in.)
|
Construction
|
Housing: High-impact flame-retardant thermoplastic
Color(s): Black
Protection rating: IP20
|
Installation
|
Mounting points: Adjustable bracket
Orientation: Any
Location: Indoor use only, must be fastened to surface or structure
Minimum distance to illuminated surfaces: 0.5 m (19.7 in.)
Minimum distance to combustible materials: 0.3 m (11.9 in.)
Minimum clearance around fan and air vents: 0.3 m (11.9 in.)
|
Connections
|
AC power in/thru: Neutrik PowerCon
DMX data in/out: 5-pin locking XLR
|
Electrical
|
AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 200 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.:
|
Typical Power and Current
|
110 V, 60 Hz: 1.9 A, 200 W, PF 0.99
230 V, 50 Hz: 0.9 A, 196 W, PF 0.95
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:
|
Thermal
|
Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature: 0° C (32° F)
Total heat dissipation (calculated, +/- 10%): 685 BTU/hr.
|
Approvals
|
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1573
US EMC: 47 CFR Part 15 Class A
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241
|
Included Items
|
Lamp (installed)
Mounting bracket
Power cable, 1.5 m, without mains plug
|
Accessories
|
Power cables, 16 A, for connection to power in chains:
Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511
|
Power connectors
|
Neutrik PowerCon NAC3FCA female connector for power in, cable mount, blue: P/N 05342804
Neutrik PowerCon NAC3FCB male connector for power out/thru, cable mount, light grey: P/N 05342805
|
DMX link
|
DMX termination plug, 3-pin male XLR: P/N 91613017
5-pin male XLR to 3-pin female XLR adaptor: P/N 11820005
|
Installation hardware
|
G-clamp: P/N 91602003
Half-coupler clamp: P/N 91602005
Safety cable, safe working load 50 kg (110.3 lbs.): P/N 91604003
|
Related Items
|
RUSH™ Software Uploader 1: P/N 91611399
|
Ordering Information
|
RUSH Wizard™ in cardboard box: P/N 90480070
|