CROWNCTs 2000

Two-channel, 1000W Power Amplifier

 

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

Dual (per ch.)

Bridge mono

16Ω

70V

100V

16Ω

140V

200V

1000W

1000W

1000W

625W

1000W

1000W

2000W

2000W

2000W

2000W

2000W

Features

·       High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis

·       Crown Switching Power Supply for lighter weight

·       Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models

·       100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200

·       Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability

·       4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels

·       Comprehensive array of indicators provide accurate diagnostics

·       Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.

Specifications

Channels

2

Sensitivity

1.4 V

Signal to Noise Ratio (below rated power 20 Hz

to 20 kHz, A-Weighted)

105 dB

THD (full rated power, 20 Hz - 20 kHz)

< 0.1%

Damping Factor (10 Hz to 100 Hz)

<3000

Frequency Response (at 1W, 4/8 ohms)

+/- 0.25 dB

Crosstalk (below rated power) 20 Hz to 1 kHz

> 80 dB

Common Mode Rejection (20 Hz to 1 kHz)

> 50 dB

Maximum Input Level before Compression

+20dBu

Load Impedance

70V, 100V (2-16 Ohms)

Voltage Gain (at maximum level settings) (8/4

ohm operation)

35:1 (31 dB)

Power Draw at Idle (120VAC mains: standby

mode)

35W

Dimensions

3.5" x 19" x 14.25"

Weight

22.8lbs

Shipping Weight

27.7 lbs