JBLControlontrol SB2210

Dual 10” Compact Subwoofer


Dual 10” Compact Subwoofer

The Control SB2210 provides low frequency reinforcement for a wide variety of sound system applications. Its compact size, high output and outdoor capable design makes it one of the most versatile subwoofers in the installation market.


·       2 x 250 mm (10 in.) Woven Fiberglass Cone LF Drivers

·       500 Watts Power handling

·       Frequency Response Down to 38 Hz

·       13 x M6 Insert Points Including Inserts for Optional U-Bracket

·       Compact, Low Profile Design


Frequency Range (-10 dB)

38 Hz - 500 Hz

Frequency Response (-3 dB)

48 Hz - 95 Hz

Power Rating

500W (2000W peak) Continuous Pink Noise (2 hrs)

1000W Continuous Program(2 hrs)

400W (1600W peak) Continuous Pink Noise (100 hrs)

Maximum Input Voltage

60.0VRMS (2 hrs), 120V peak


95 dB, 1W @ 1m in half-space (2π loading, average 50 – 90 Hz)


122 dB in half-space (2π loading)

Nominal Impedance

Minimum Impedance

7.2Ω at 160 Hz

Recommended Filter

45 Hz, 24 dB/oct high-pass filter

Low Frequency

Two 250 mm (10 inch) diameter LF drivers, long-excursion design, woven fiberglass cone, highly damped butyl rubber

surround, linear suspension spider , high temperature anodized aluminum voice coil former, high-temp voice coil wire and

coil adhesive, FEA optimized motor construction, aluminum conductive ring.

Enclosure Material

High Impact PolyStyrene (HIPS) w/ 10% glass fill and internal 8 mm polyurethane co-mold, painted with highly-UV-

resistant paint on white (-WH) model for maximum UV fade resistance.


Thermoset composite coated steel, zinc-plated, 3-layer foam backing.


IP-45 rating per IEC529 when installed with included MTC-PC2 terminal panel cover. Exceeds MilSpec 810 for humidity,

salt spray, temperature & UV. Passes Mil-STd-202F for salt spray.


Screw-down terminal strip, zinc plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside,

4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5mm2). Included MTC-PC2 and optional

MTC-PC3 protective covers available to provide sealed entrance for additional weather protection.

Agency Rating

ROHS-compliant. Optional MTC-SBT300 transformer is UL recognized per UL1876.


Black or white (-WH)

Dimensions (H x W x D)

355 x 590 x 570 mm (14 x 23.3 x 22.5 in.)

Net Weight

23.31 kg (51.4 lb)

Shipping Weight

25.85 kg (57.0 lb)

Included Accessories

1 pc MTC-PC2 input panel cover, 4 pcs floor standing feet 4 pcs beveled washers.

Optional Accessories

MTC-210UB (&-WH) U-Bracket

MTC-SBT300 70V/100V Transformer, 300W multi-tap, installs onto inside of back input panel using included 4 studs.

Transformer Taps:

70V: 300W, 150W, 75W, 38W

100V: 300W, 150W, 75W

Sản phẩm cùng loại