JBLControl 19CS

In-Ceiling Subwoofer

In-Ceiling Subwoofer

The Control 19CS uses advanced proprietary technologies to produce powerful bass from a low profile in-ceiling design.


·       Unique Nested Chamber™ design and Linear Dynamic Aperture™ port design delivers high output from a compact enclosure.

·       JBL’s exclusive SonicGuard™ overload protection allows higher operational levels and improved system reliability.

·       Component: Long excursion 200 mm (8 in) driver.

·       Packaged with grille, backcan and tile rails for fast installation and easy stocking.

·       Simple installation and wire connection method.


Frequency Range

42 Hz - 200 Hz

Power Capacity

200 W Continuous Program Power

Nominal Sensitivity

95 dB SPL, 1W @ 1 m (3.3 ft) in ceiling near corner (π/2) 89 dB SPL, 1W @ 1 m (3.3 ft) in center of ceiling (2π)

Nominal Coverage Angle

180° conical coverage

Rated Maximum SPL

115 dB @ 1 m (3.3 ft) in ceiling near corner (π/2)

Nominal Impedance

8 ohms

Low Frequency

200 mm (8.0 in) Polypropelene cone. 

38 mm (1.5 in) coil on aluminum former

Enclosure Material

Backcan: Formed steel Baffle/Rim: Medium impact polystyrene, fire rated UL94V-0

Overload Protection

Full-range power limiting to protect network and transducers. (On Control 19CS, not on Control 19CST)


Removable locking connector with screw-down terminals. 2 input terminals and 2 loop-thru output terminals.

Max. wire size 12 AWG (2.5 mm2)

Safety Agency Rating

In accordance with IEC60849 / EN60849. Suitable for use in air handling spaces, per U.L.-2043, U.L.-1480, NFPA90,


Outside Dimensions (H x Dia)

345 x 345 mm (13.6 x 13.6 in) 318 mm (12.5 in) front of ceiling tile to back of backcan

Cutout Size (H x W)

305 mm (12.0 in)

Net Weight (ea)

5.5 kg (12 lb

Shipping Weight (pair)

Control 19CS: T12.7 kg (28 lb)
Control 19CST: 14.3 kg (32 lb)

Included Accessories

C-shaped support backing plate 2 tile support rails (fits both 2 x 4 ft or 600 x 1200 mm tiles) Cutout template Paint shield

Removable locking wiring connector