JBLControl 60PS/T

Pendant Subwoofer with Crossover




Pendant Subwoofer with Crossover

The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions.

Features

·       High impact, 150 Watt direct radiating pendant subwoofer with built-in passive crossover for up to four satellite speakers.

·       200 mm (8 in) long-excursion driver.

·       8 ohm (150 Watt) and 70V/100V (100 Watt) operation.

·       Hanging hardware with 4.5 m (15 foot) galvanized steel cable and easy to adjust clamp.

·       Stylish design, available in black or white (-WH).

·       UL listed (speaker and hanging cable system).

Specifications

Frequency Range (-10 dB)

42 Hz – 350 Hz

Frequency Response (± 3 dB)

55 Hz – 125 Hz

Power Capacity

300 Watts Continuous Program Power, 100 hrs 

150 Watts Continuous Pink Noise, 100 hrs

Nominal Sensitivity (2.83V/1m)

88 dB

Rated Maximum SPL

107 dB @ 1 m (3.3 ft) average, 113 dB peak

Rated Impedance

8 ohms

Transformer Taps

110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8

Transformer Insertion Loss

0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110W

Standalone Hookup

Connect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre

low-pass filter) for sending to additional speakers.

Subwoofer-Satellite Hookup

For either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must

Connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested

satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling).

Satellite speakers to be low-Z type (8 to 16

Transducer

200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice

coil, vented fiberglass resin voice coil former.

Enclosure Material

High impact polystyrene

Grille

Zinc-plated steel grille with powder-coat finish, foam backing (grille and grille backing are removable for painting)

Environmental

Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof rating

Termination

Six removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire

12 AWG (2.5 mm2). Rubber terminal covers included.

Suspension

Two identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting

of4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for

clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable

height. Cable has SWL rating of 45 kg (99 lb).

Safety Agency

Speaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849.

Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01

& Class 3426-81.

Dimensions

333 mm (13.1 in) diameter, 344 mm (13.6 in) height to top of cabinet.

369 mm (14.5 in) to top of suspension bracket.

Net Weight

7.6 kg (16.7 lb)

Shipping Weight

17.6 kg (38.7 lbs) per pair-packed carton

Included Accessories

Two suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber

cover boots for euroblock connectors.

Optional Accessories

MTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number

and dimensions of wire.

Colors

Available in black or white (-WH). Paintable.