JBLASB6115

High Power Single 15" Subwoofer

 

High Power Single 15" Subwoofer

The ASB6115 is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s 2265H-1 Differential Drive® dual voice coil dual gap 15" woofer. This woofer features neodymium magnet and ultra robust cone for extra long life.

Features

·       2265H-1 15" Differential Drive® dual voice coil dual gap, neodymium magnet transducer

·       800 watts continuous pink noise, 3200 watts peak power handling capacity

·       Large vent area for high output with low distortion

·       For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products

Applications

·       Performing arts facilities

·       Theatrical sound design

·       Auditoriums

·       Houses of worship

·       Live clubs

·       Dance-clubs/discotheques

·       Sports facilities

·       Themed entertainment venues

Specifications

Frequency Range (-10 dB)

32 Hz - 1 kHz

Frequency Response (± 3 dB)

42 Hz - 1 kHz

Transducer Power Rating

800 W (3200 W peak), 2 hrs.

Long-Term System Power Rating

675 W (2700 W peak), 100 hrs.

Maximum SPL (1m)

35 Hz - 400 Hz: 126 dB-SPL cont avg (132 dB peak)

System Sensitivity

35 Hz - 400 Hz: 97 dB-SPL, 1W (2.83V) @ 1m

Nominal Impedance

8 ohms

Low Frequency Driver

1 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® driver

Enclosure

Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood

Suspension Attachment

16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware

Finish

Black DuraFlex™ finish. White available upon request.

Grille

Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector

NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications

Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)

483 x 419 x 597 mm (19.0 x 16.5 x 23.5 in)

Net Weight

20.6 kg (45.5 lb)

Optional Accessories

M10 x 35 mm forged shoulder eyebolts with washers. 

Sản phẩm cùng loại